Pro266TD Master

Pro266TD Master

Pro266TD Master (Standard Version)

Pro266TD Master-LR (10/100 LAN, ATA RAID)
  • Pro266TD Master


Supports Single/Dual Inte® Pentium® III processors
Supports Coppermine up to 1.1GHz @ 133MHz FSB
Supports Tualatin up to 1.26GHz or higher @ 133MHz FSB

Note : Both Tualatin with 256K L2 cache and Tualatin with 512K L2 cache are able to be used on the motherboard. But Tualatin with 256K L2 cache can be used only when you install SINGLE CPU on the board.


VIA® VT8653 chipset
- 100/133MHz FSB settings
- AGP 4x and PCI Advanced high performance memory controller

VIA® VT8233 chipset
- High Bandwidth Vlink Client controller
- Integrated Fast Ethernet LPC
- Ultra DMA 33/66/100 master mode PCI EIDE controller
- 266MB/sec high bandwidth North/South Bridge V-Link Bus


Supports 100/133MHz FSB

Main Memory

Supports eight memory banks using four184-pin DDR DIMM
Supports up to 4GB ECC registered DDR200/266 DRAM
Supports 2.5v DDR DRAM
Supports only x8 technology


One (Accelerated Graphics Port) AGP slot
  - AGP specification compliant
  - Supports AGP 2.0 4x
Five 32-bit Master PCI Bus slots
  - Supports 3.3v/5v PCI bus Interface

On-Board IDE

An IDE controller on the VIA® VT8233 chipset provides IDE HDD/CD-ROM with PIO,
   Bus Master and Ultra DMA 33/66/100 operation modes.
Can connect up to four IDE devices

Promise 20265R On-Board
(Pro266TD Master-LR only)

Supports IDE RAID 0, 1
Can connect up to four IDE devices

(Pro266TD Master-LR only)

Intel® 82559 Lan controller
  - Integrated IEEE 802.3 10BASE-T and 100BASE-TX compatible PHY
  - Wake-On-LAN and WFM 2.0 support
  - ACPI and PCI Power Management

On-Board Peripherals

On-Board Peripherals include:
  - 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes.
  - 2 serial ports (COMA + COM B)
  - 1 parallel port supports SPP/EPP/ECP mode
  - 6 USB 1.1 ports (2 Rear Connectors/ 4 from USB Front Pin Headers)
  - 1 IrDA connector for SIR/CIR/ASKIR/HPSIR.


The motherboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and
   expansion cards of the board automatically.
The motherboard provides a Desktop Management Interface (DMI) func-tion which records your


30.4 cm(L) x 25.4 cm(W)ATX Form Factor


9 mounting holes.